|
The UTX-P1 plug-on transmitter is designed to be used with Sony UWP series wireless tuners. It's extremely durable and is well balanced for use with the Sony F-112 – a dynamic microphone suited to cost-effective newsgathering applications. The UTX-P1 plug-on transmitter also accepts line-level audio input signal as well. Whether used in a low-cost ENG or EFP system, the UTX-P1 delivers the convenience of uncompromised wireless microphone operation at a very affordable price.
- Plug-on transmitter designed for use with the UWP Series tuners
- Operates over a wide 24 MHz frequency band within the range of 838 MHz to 862 MHz
- Converts a wired microphone to a wireless microphone via an XLR connector
- Compact and lightweight body provides balanced handling
- Attenuator function allows adjustment of the microphone-input level
- Durable connecting mechanism with a microphone for dependable operation
- 50 mW RF power output for stable and long-distance transmission
- MIC/LINE input level switchable
- A backlit LCD provides extensive information, including the operating channel number and frequency in MHz, attenuator level, audio-input status, RF-output status, transmitterbattery status, and accumulated operating time
- An LED indicator for audio-input status
- Approximately six hours of continuous operation with two AA-size alkaline (LR6) batteries
- Supplied with a soft case
|
- Type of Transmitter Plug-on Transmitter: Crystal-controlled PLL synthesizer
- # Of Channels: 188
- Type of Input Connector: 3-pin XLR
- Type of Microphone: Accepts 3-pin XLR terminated hard wired microphones
- Polar Pattern: not applicable
- Interchangeable Mic Heads Accepts: 3-pin XLR terminated hard wired microphones
- Frequency Response: 50Hz to 18kHz (typical)
- Battery Type/Approx. Life: x2 AA Batteries, approx 6 hours
- Mute Switch: not specified by manufacturer
- Level Control: 0 to 21dB (in 3dB steps)
- Antenna Type: Internal
- Display LCD: operating channel number/frequency, attenuator level, audio-input status, RF-output status, transmitter battery status, and accumulated operating time. LED: audio-input status
- Dimensions: 1.75 x 3.87 x 1.43
|
|